Parts

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.

- LEV CI takes rhythm from the trail and injects it straight into your soul. - 65-175 millimeters of perfect drop are just enough to turn your ride up to eleven. - A full unidirectional carbon mast routes our Recourse II Ultralight Cable System directly through your frame to our KGSL lightweight remote – a combination saving over 50g compared to our KG ALLOY remote and standard shift cable. - The result is clean lines for you and your bike. LEV CI’s newly designed cable interface system is easier to setup and service while at the other end, a high compression-molded head connects LEV CI to your saddle. - Our patented one-way roller clutch bearing and highly evolved seal collar keep LEV CI running smooth and free of side-play for thousands of miles and vertical feet.

Designed and manufactured by PEMBREE in the UK with the strictest environmental standards, the PEMBREE the D2A pedal is totally carbon neutral. PEMBREE components are hand-crafted and fully made in England. All components, from the aluminium all the way to the bearings, are sustainably sourced and easily recyclable. PEMBREE D2A is designed as the ultimate racer's flat pedal. Balancing perfectly between traction, strength and weight. Riders of the D2A benefit from unrivaled grip via PEMBREE designed and manufactured Traction Pins, the strength of a stainless-steel spindle and premium bearings. - Spindle: Stainless Steel - Pedal Body: Aluminium - Traction Pins: Stainless Steel - End Cap: Aluminium - Inner Bearings: IGUS JSM - Outer Bearings: Sealed Ball Bearings - Pins: 10 Traction Pins per side - Body Dimensions: 100mm x 110mm x 15mm (centre) - Weight: 446g - Warranty: 5 years, 2 years bearings

PEMBREE DBN is an entirely new seat post clamp. Due to the double barrel nuts DBN provides a consistent clamping force ensuring the bolt remains straight through-out its travel. This is particularly important when clamping dropper posts to prevent pitch points that damage frames and posts. Machined to exacting standards ensures a precision fit that is critical to secure clamping. DBN seat post clamp is manufactured from aluminium that is 75% recycled, unheard of in the industry. Machined from stainless steel the precision, custom made bolt provides the core clamping function of DBN. - Clamp: Aluminium - Bolt: Stainless Steel TX25 - Barrel Nuts: Aluminium - Weight: 27g - Warranty: 5 Years

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Aheadset preload adjusting bolt

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Replacement small parts for Hope disc brake Hope disc brake calipers.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Brass compression olive for Hope hydraulic disc brakes.

Replacement piston and seals for Hope disc brake calipers.

Replacement piston and seals for Hope disc brake calipers.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Hope Brake Lever Parts

Bar end plugs (2)

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

FSA Mega Exo Small Parts.

FSA Standard Headset Bearings

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Bulk packaged, corrosion resistant stainless steel fasteners.

Flat head screws from Wheels Manufacturing.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing