Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0
Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)
Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12
Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.
When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.
Don’t throw out your bearing cups - rebuild them to a better spec! - Includes two bearings and seals - Grade 10 steel balls rated at ABEC 3 precision - Packed with High Pressure Marine Grease - Races are treated with a black oxide coating, which helps to prevent prevent rust and corrosion - Enduro BB bearings do not use axle shims which allows for a reduced bearing ID and the use of larger balls - Made with x14, 5/32" balls (instead of x16, 1/8" balls) - This kit requires tool # 360-2100 to remove and install bearings in the cups
Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with SRAM DUB cranksets (28.99mm spindle) - Stainless steel double row bearings: 440C Stainless steel balls and races Vendor Part # BKS-7016
Fits all Road or Mountain bikes with BB90 or BB95 shell - Includes two bearings and two seals - Compatible with 24mm spindle cranks - Grade 10 steel balls; ABEC-3 precision - 50g
Designed for frames with threaded BSA 73mm BB shell - Compatible with cranksets with a 30mm spindle greater than 104mm in length - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6053
MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA Vendor Part # BKSM-8112 This BB requires a Shimano XT BB tool for install and removal (ex. Abbey BB SCT, Park LRT-4)
Designed for BSA 68/73mm bottom bracket shells when using a SRAM DUB Crankset. - Grade 3 Ceramic balls (Si3N4), with ABEC 5 precision - CN Bearing Clearance - Races are ultra-durable for longer life! Nitrogen infused steel, heat treated and cryogenically frozen - These bearings are 3.5 times more corrosion resistant than stainless steel - Will not rust; little servicing required - Silicone seals. These are the lowest friction bearings available; period! Vendor Part # BKC-0815
Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For 68mm bottom bracket shell, use with 30mm crank spindle Made in the USA Vendor Part # BKC-0805
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
- Aheadset preload adjusting bolt
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Service parts for Fox suspension.
$1.00
Replacement small parts for Hope disc brake Hope disc brake calipers.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$1.20
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.20
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
KS Dropper Post Service Parts
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
Page 1 of 58 Next page