Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Electronics

CatEye Cadence Pedal Magnet
$3.00
Cadence Magnet for all CatEye computers that record cadence.
Bontrager Computer Batteries
$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager Duotrap S Cover - Carbon Road Frame
$3.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager SpeedTrap Accessories
$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
Lezyne GPS O-Ring Set
$3.99
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
Bontrager DuoTrap S Chainstay Cover - Alloy Frames
$4.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager Madone DuoTrap Chainstay Frame Cover
$4.99
Frame Cover fills chainstay pocket when sensor is removed.
CatEye Universal Wheel Magnet
$4.99
Wheel magnet for all CatEye cycle computers
Sigma Sport CR 2032 Battery
$4.99 - $17.99
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16
K-Edge Replacement Garmin Insert Kit
$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
K-Edge Replacement Wahoo Insert Kit
$5.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
MSW Cadence Sensor Magnet
$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
MSW Speed Sensor Magnet
$5.00
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
CatEye H-34 Flex-Tight Bracket
$5.95
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.
Bontrager USB Fast Charge Cable
$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
CatEye FlexTight Kit Wireless CC
$6.95
Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.
Lezyne GPS Bar/Stem O-Ring Mount
$6.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.
Problem Solvers Shimano Di2 Junction Box Under Stem Mount
$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
Bontrager 26mm Cadence Band Magnet
$7.99
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager 4mm Cadence Band Magnet
$7.99
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager Cadence & Speed Magnets
$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Delta Stem Bolt Mounted Computer Caddy
$9.99
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side
Delta Tablet Extension Arm For Handlebars
$9.99 $19.99 50% Off
Extension Arm holds tablets at comfortable viewing distance. - For use with trainers and spin bikes only - Compatible with all Delta Tablet Holders (sold separately) - Premium aluminum construction - Instant attachment and removal - Rubber coated to protect stem and bars
Garmin Quarter Turn Bike Mount
$9.99
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
MSW Miniac Harness
$10.00
Heavy-duty harness for Miniac 7-function computer.
Profile Design UCM Universal Computer Mount 25mm
$10.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Delta Smartphone Caddy II
$12.99 - $24.99
The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter
No Image
$13.99
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Planet Bike Protege Rear Wheel Bracket - 130cm Wire & Hardware
$13.99
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Page 1 of 8 Next page